Rigging is only permitted above your space only stand, subject to a branding charge and must comply with the maximum rigging height of 6m from ground to the highest element of the structure. Rigging is only permissible for Space Only Stands. Permission will only be granted after written request to the exhibition organizers.
All Rigging must be included in your stand design and approved by ESM the Stand Design approval team before ordering services.
All rigging within the venue must be carried out by the official supplier – Unusual Rigging. Banners must not project onto the aisles or a neighbouring stand and must be hung within the perimeter of your stand.
The trim height for all signage banners at the show is 6m (meaning the underside of all signage banners must be trimmed at 6m). For rigged stand design elements, these will be reviewed & assessed on a stand-by-stand basis.
Rigging is only permitted above your Space Only stand and must comply with the trim height of 6m (meaning the bottom of the banner to the floor must be at 6M).
Rigging is only permissible for Space Only Stands. Permission will only be granted after a written request to the exhibition organizers. All Rigging must be included in your stand design and approved by the Operations Team before ordering services.
- All rigging related services must be carried out by the Venue.
There is no Rigging/Suspensions for GESS Saudi
Rigging is permitted only for space only exhibitors. For shell scheme exhibitors, rigging is not allowed. Please refer to the following regulations to ensure compliance with the organizer and venue rigging regulations.
No hanging structures are allowed for stands smaller than 30sqm.
Rigging is only permitted above your space only stand and max height is 6m to top of banner and truss can go slightly above this. For clarity, this is measured to the top of the truss, including any projections above it. Truss heights will be checked via laser measure.
PX Systems has been appointed the official Suspensions & rigging contractor for Labelexpo Southeast Asia. Please submit your rigging order form before 28th March 2025 for early rates.
No hanging structures are allowed for stands smaller than 30sqm.
PLEASE NOTE: the maximum height allowed for rigging is 6 meters.
Please note that NOT all the areas on Jalisco Halls can have rigging. Please check with Expo Guadalajara if your stand location can have rigging. If so, please contact Expo Guadalajara below.
No hanging structures are allowed for stands smaller than 30sqm.
PLEASE NOTE: the maximum height allowed for rigging is 5.5 meters.
Rigging is only permitted above your space only stand and must comply with the maximum building height of 6m from ground to the highest element of the structure.
All rigging orders must be made directly with Arab Expo.
Order form access code: KSA2024
Rigging is not permitted in the venue.
Please contact the show operations team operations.aerospace@informa.com for information.
All rigging within the venue must be carried out by the official supplier – Unusual Rigging. Banners must not project onto the aisles or a neighbouring stand and must be hung within the perimeter of your stand.
The trim height for all signage banners at the show is 6m (meaning the underside of all signage banners must be trimmed at 6m). For rigged stand design elements, these will be reviewed & assessed on a stand-by-stand basis.